Spider DSA User’s Manual
253
Figure 164: Input Channel Status
Once ready, there are four ways to start a test: the F2 function key, the Run button
on the control panel, the Run button on the toolbar, and the Run command in the
Control menu.
Viewing Signals
Signal data is displayed under the Signal Display tabs. More than one of these
tabs can be opened but only one is active at a time. Each tab can have a custom
title. Each Signal Display tab contains one or more display windows that
display data in various kinds of plots. These windows can be freely arranged
inside the tabs or ordered using the commands under the Layout menu.
To Next Page
Loading...