Spider DSA User’s Manual
385
Zoom in/out
These two are action buttons, designed to zoom in or zoom out the geometry
model. Click either button will zoom in or zoom out the model.
Besides, these two buttons, the size of the geometry model can be resized using
the mouse wheel.
Auto Scale
Click this button, the default setting values will be applied to the geometry model.
The origin, orientation, as well as scale of the geometry model will be reset to the
defaults.
Show/Hide objects
Following toggle buttons control the display of different objects.
Point
Point
With the button toggled on, the points will be displayed on the geometry model,
as a small dot, with color defined in the Edit Model, point tab.
Following screenshot illustrates the point, with line depicted.
Figure 248. Show Points in A Cylinder Model
To Next Page
Loading...