Spider DSA User’s Manual
410
4. Verify the settings for PTP External Clock Mode. The correct settings are shown
below:
One_PPS_Mode: Disable
External Enable: False
VCXO: Enable: False
Clock Frequency: 1
5. Assign the PTP clock to all ports. This step is shown in the picture below. Click on
the “Save” button after assigning the clock to ports.
Do not change the other settings. The Spider-HUB is now ready for use.
License Key Management for Multiple Module System
There are two types of license keys used in the multiple module system. These
license keys are described here in brief.
To Next Page
Loading...