Spider DSA User’s Manual
124
Figure 78: Input Channel Status
Once ready, there are four ways to start a test: the F2 function key, the Run button
on the control panel, the Run button on the toolbar, and the Run command in the
Control menu.
To locate a specific test, you can search for text in the Test Description edit box.
The database manager can quickly locate tests with a keyword search.
Viewing Signals
Signal data is displayed under the Signal Display tabs. More than one of these
tabs can be opened but only one is active at a time. Each tab can have a custom
title. Each Signal Display tab contains one or more display windows. These
windows display data in various kinds of plots. These windows can be freely
arranged inside the tabs or ordered using the commands under the Layout menu.
To Next Page
Loading...