Spider DSA User’s Manual
354
Live signals can also be viewed for a specific Spider system while the Spider is
running in the black box mode.
Simultaneously Monitoring Multiple Tests
Interface of EDM – RCM has a default view which enables Project Status display.
The project status includes the running status, Connection Status, Time elapsed,
GPS coordinates, Active alarms and number of files recorded or saved.
The status of each Spider can be automatically refreshed periodically using a user
customizable time setting or each Spider module can be manually refreshed to get
the updates on the status.
When live data is needed for any test, connect to the specific test and configure
the Signal display tab to stream live data from the Spider to the EDM.
To Next Page
Loading...