Crystal Instruments Spider - Define a Custom Synthesis Table

Spider DSA User’s Manual
202
Define A Custom Synthesis Table
Click “Define A Custom Synthesis Table” will open a window which allows the
operation of user defined zeros and poles. The zeros and poles can be added,
deleted or edited, using the “Add”, “Delete”, and “Edit” button under the lists. To
synthesize a signal, at least one Pole needs to be defined.
“Time Delay”, “Gain” and “Frequency Scale” can be set by the user.
Following definition table has the zeros and poles transferred from the previous
curve fit table. One of the poles is modified for the purpose to illustrate the
synthesis process.