Spider DSA User’s Manual
110
On the third page in the DSA mode test wizard you enable the various types of
computed functions that will be employed. These include time histories,
computed time histories such RMS, Peak and Tachometer RPM, FFT spectra,
Averaged Auto and Cross Power spectra, Shock Response Spectra and Frequency
Response and Coherence functions. Pressing Finish> exits the wizard and enters
the DSA Test screen.
Figure 67: A DSA Test
The DSA Test screen is divided into 5 parts. On the top is the menu and toolbar
section. On the left side, are the Recent Test List and the Signal List sections. On
the right are the Test Control section and the Status window. In the middle are the
Signal Display and Signal Setup tabs.
To Next Page
Loading...