Spider DSA User’s Manual
132
Figure 88: Plot Popup Menu
View as Stacked Plot is available if there is more than one signal in the plot
window. Stack mode will display each signal in separate plots, stacked vertically.
If the window is already in Stack Mode, then Switch to Overlaid Mode will be
displayed instead. Overlaid Mode will show each signal in the same plot.
Zoom Back zooms out to the previous zoom ratio
Un-Zoom All zooms out to the full scale so the entire signal is visible
X/Y Scale has options for adjusting the scale of the X and Y axes.
Figure 89: X/Y Scale Options
Auto Range turns on automatic scaling for the axes
Restore Scale reverts to the previous axes display
Axis Setting opens this window, used to set a custom range. This can also
be opened directly by double-clicking on the axis label area.
Figure 90: X-Axis Setting
To Next Page
Loading...