Spider DSA User’s Manual
309
Figure 217: Typical 3D Color Map display
The above figure shows a typical 3D Spectrogram and a typical 3D Waterfall plot.
The Z axis properties can me modified by clicking on the Z-axis line of the chart
which pops up a Z axis setting window.
Figure 218: Z Axis Settings for 3D displays
The Delta time which defines the spacing between two consecutive data frames
on the Z axis can be modified. The Frame Size gives the maximum number of Z
axis points that must be displayed. For e.g. a frame size of 50 can store up to 50
block signal’s data and display it to the user.
To Next Page
Loading...