Spider DSA User’s Manual
363
Figure 222: SRS Analysis Parameters and Synthesis Parameters
Fractional Octave Number is chosen from 1/1, 1/3, 1/6, 1/12, 1/24, 1/48.
Low Frequency: defines the lowest frequency boundary of the SRS spectrum.
High Frequency: defines the highest frequency boundary of the SRS spectrum.
Damping Ratio (%): defines the damping ratio as a percentage.
Q (Quality Factor) is a dimensionless parameter that describes how under-
damped an oscillator or resonator is, or equivalently, characterizes a resonator's
bandwidth relative to its center frequency.
Wavelet Window Type is the windowing function available from Sine, Hann,
Exponential, and Rectangular.
To Next Page
Loading...