Crystal Instruments Spider - Page 365

Spider DSA User’s Manual
365
icons related to create, edit, remove or save the model. While the icons on the top
side are related to the display of the geometry model.
Here’s the example of creating a geometric shape as shown above. Click the Add
Object button and then click the Add Panel button.
Figure 224. Add Panel Window
Choose the panel direction as X-Y. Therefore, the panel created will be on the X-Y
plane. Origin of X, Y, and Z is the initial center coordinates of the panel. User can
choose to add a displacement to either direction if necessary. Size is the total
width and height of the panel. Cell defines the number of cells along each
direction. Rotate is the rotational movement on specific axis such as XY axis, XZ
axis, and YZ axis. With above parameters set, press OK to finish creating such a
geometric shape.
Click the Perspective button on the top right corner of the graph window to
display a 4-pane view window as shown below.