Spider DSA User’s Manual
380
Figure 242. Add Cylinder Window
The First and End center points are defined by their X, Y and Z coordinates,
which is the center line of the Cylinder.
The Circle Size defines the radius of the cylinder. The unit follows the global
displacement setting of the EDM software.
The Cell counts for Arc defines the number of sections of the cylinder circle. While
the height count defines the sections along the height of the cylinder.
Rotate values entered to XY, XZ, and YZ plane define the Euler angle of the
cylinder. These values need to be set per orientation of the cylinder under the
global coordinate system.
To Next Page
Loading...