EasyManua.ls Logo

Cupra TERRAMAR 2024 - Troubleshooting

Cupra TERRAMAR 2024
430 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Opening and closing
101
Keyless Access system
Comfort functions
To close all the electric windows and the sun-
roof using the comfort function, keep a nger
for a few seconds on the locking sensor sur-
face
B
of the door handle until the windows
and roof have closed.
How the doors open when touching the sen-
sor surface on the door handle will depend on
the settings that have been activated in the
infotainment system, using the function button
> Vehicle > Exterior > Opening/Closing.
NOTICE
Deactivating the Keyless Access system also
deactivates the sensor controlled opening
and closing of the rear lid, although the func-
tion is shown as “active” in the vehicle menu.
Note
Depending on the function set on the info-
tainment system for the mirrors, the exterior
mirrors will unfold and the surround lighting
will come on when unlocking the vehicle us-
ing the sensor surface on the driver and pas-
senger door handles.
If the vehicle is tted with an automatic
gearbox, the vehicle can only be locked by
pressing the parking lock button P.
To improve the safety of your vehicle, the
system’s remote control is equipped with a
position sensor. If this remote control does
not detect movement for a certain period of
time, the system will understand that you do
not intend to open the vehicle (e.g. on the
table at night) and will therefore be deactiva-
ted.
Troubleshooting
The Keyless Access system does not work
The operation of the sensor surfaces may be
limited if they are soiled.
Clean the sensor surfaces.
All turn signals ash four times
The key that was last used is still inside the
vehicle.
Remove the key and lock the vehicle.
Automatic deactivation of the sensor surfa-
ces
The sensor surfaces are deactivated in the fol-
lowing cases:
If the vehicle is not unlocked or locked for a
long period of time.
If any of the sensor surfaces are activated
unusually often.
To reactivate the sensor surfaces:
Unlock the vehicle using the button on the
vehicle key.
NOTICE
The sensor surfaces on the door handles may
activate if hit by a jet of water or high pres-
sure steam if there is a valid vehicle key in
the proximity area. If at least one of the win-
dows is open and the sensor surfaces on one
of the handles permanently activates, all of
the windows will close. If the jet of water or
steam is briey moved away from the sensor
surfaces of one of the handles and redirected
towards them, all of the windows may open.
Note
If the message Keyless system faulty is dis-
played on the instrument cluster display, ab-
normalities may occur in the operation of the
Keyless Access system. Contact a specialised
workshop.
Note
If there is no vehicle key inside the vehicle or
the system fails to detect one, a warning will
display on the instrument cluster screen. This
could happen if another radio frequency sig-
nal (e.g. mobile phone or wireless charger)...
interferes with the key signal or if the key is
covered by another object, e.g. a metal case

Table of Contents

Related product manuals