EasyManua.ls Logo

Cupra TERRAMAR 2024 - Reverse Assist (Rear View Camera)

Cupra TERRAMAR 2024
430 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Parking and manoeuvring
247
Reverse Assist (Rear View Camera)
WARNING
When exiting a parking space, there is a risk
that the vehicle could drive into traic, which
could result in an accident and serious or fa-
tal injuries.
Ensure that the vehicle leaves the parking
space only when the traic situation permits.
Reverse Assist (Rear View
Camera)
Introduction
A camera installed in the rear lid handle assists
the driver with reverse parking or manoeuvring
›››page197.
The camera image is viewed together with ori-
entation lines projected on the Infotainment
system screen. Part of the bumper can be seen
at the bottom, which can be used by the driver
as a reference point.
Reverse assist modes
Depending on the equipment, the following
modes are available:
Angle parking: reverse parking perpendicu-
lar to the road.
Trailer towing assist function: assistance
with hitching a trailer.
Cross traic: monitors cross traic.
Requirements
To park with reverse assist, the following re-
quirements must be met:
Do not exceed a speed of approx. 15km/h
(9mph).
Parking space width: vehicle width + 0.15 m
(without counting the mirrors).
To display a real image, the following require-
ments must be met:
The luggage compartment rear door is
closed.
The surroundings are on a at surface.
The vehicle should not be loaded very heav-
ily at the rear.
WARNING
The reverse assist does not make it possi-
ble to precisely calculate the distance from
obstacles and nor can it overcome the sys-
tem's own limits, hence its negligent use may
cause serious accidents and injuries if used
without due care. The driver should be aware
of his/her surroundings at all times to ensure
safe driving.
The camera lens expands and distorts the
eld of view and displays the objects on the
screen in a way that is dierent from reality.
Distance perception is also distorted.
Due to the screen resolution or light con-
ditions, some items may be blurry or not dis-
played at all. Take care with thin posts, fen-
ces, railings or trees that might not be seen
on the screen and could damage the vehicle.
The reverse assist has blind spots where
it cannot see people or objects. Monitor the
vehicle's surrounding area at all times.
The system is not a replacement for driver
awareness. Supervise the parking manoeu-
vre and the vehicle's surrounding area at all
times.
Do not be distracted from the traic by
looking at the screen.
The images are only two-dimensional. Pro-
truding objects or holes in the road, for ex-
ample, are more diicult to detect or may not
be seen at all.
Vehicle load modies the representation of
the guide lines. The width represented by the
lines decreases with vehicle load. Pay special
attention to the surroundings when the in-
side of the vehicle of the luggage compart-
ment are loaded.

Table of Contents

Related product manuals