Cupra TERRAMAR 2024 - Traffic Information; Function Descriptions

304
Infotainment system
1)
Not available on all markets.
Start navigation:
1. Press .
2. Press on the contact you want.
3. A pop-up window will appear where you
can tap on the corresponding icon:
●
: favourite destination.
●
: new route.
●
Start: starts the route to the destination.
Note
If the address details of a contact are ob-
solete, the route guidance will nevertheless
take you to the registered address. Check
that the contact address is updated.
Traic information
The infotainment system receives detailed
traic information automatically
1)
if the Inter-
net connection is established. This information
is shown with symbols and highlighting the
road network in colour on the map.
Traic incidents
Traic incidents, for example, traic jams or
congested traic, are shown on the navigation
map using symbols.
With an active route guidance, traic incidents
that are on the current route are shown in
the route details. Such traic incidents can be
avoided ›››page304, Function descriptions.
Traic ow indication
The navigation map shows traic ow accord-
ing to current traic events, highlighting the
road network in colour.
●
Yellow: Slow traic.
●
Red: Traic jam.
Note
Traic information receipt is subject to the
privacy settings. In maximum Privacy mode,
no traic information is received. Tracking or
Location level setting is necessary.
Function descriptions
Route details
The route details contain information on all in-
cidents, for example, the starting point, stop-
overs, traic events, POIs and destination, pro-
vided the navigation has such data.
If you press on an incident, an additional win-
dow opens providing more options. The avail-
able options depend on the incident and the
current settings.
Open and close the route details
●
To open them, press or swipe it.
●
To close them, press or swipe it.
Edit route guidance
To edit the route guidance, move the stop-
overs to the destination in the TripView view.
●
Hold the desired destination pressed until it
is visibly highlighted.
●
Move the destination to the desired position.
●
Remove your nger from the screen. The
route will recalculate.
Avoid traic incidents
The details of the route show the current traf-
c incidents if the navigation has such data.
Avoid traic incidents by editing route details
›››page304.
●
Press on a traic event.
●
Press on Avoid. The route will recalculate.
Split screen
When handling navigation functions, an addi-
tional window with other options may open.
Possible options depend on the function being
used.