Cupra TERRAMAR 2024 - WLAN Access Point; Configuration for Sharing a Connection over WLAN

274
Data transmissions
1)
Not available in all markets.
Create and delete a user role
Create a user
Register for CUPRA CONNECT. You can then
sign a CUPRA CONNECT contract with CUPRA,
add the vehicle to your user account and fol-
low the steps in the app to register yourself as a
new main user or as an additional user.
Delete a user
To delete the main user, restore the factory
settings of the infotainment system. If you want
to delete an additional user, the main user may
delete it manually, or the additional user can
delete himself/herself.
Note
If the infotainment system is restored to fac-
tory settings in oline mode, the user cannot
be deleted on the server.
WLAN access point
Introduction
The infotainment system can be used to share
a WLAN
1)
connection with up to 8 devices
›››page274, Conguration for sharing a
connection over WLAN.
The infotainment system can also use the
WLAN hotspot of an external device to provide
Internet to the devices connected to the hot-
spot (WLAN client) ›››page275.
Note
●
There may be a charge for the required
data transmission. Due to the high volume
of data exchanged, CUPRA recommends the
use of a at rate tari for data transmission.
Mobile phone operators can provide infor-
mation on this. You can also purchase data
plans for your vehicle on the Cubic website:
https://cupra.cubictelecom.com/es
●
Exchanging data packages and purchasing
them from third parties may generate ad-
ditional costs, depending on your mobile
phone rate, particularly if you are abroad (for
example, roaming rates).
Conguration for sharing a con-
nection over WLAN
Establishing the connection with the wire-
less network (WLAN)
●
Press the HOME > button.
●
Activate the wireless network. To do this, tap
the function button Network > Wi-Fi > Info-
tainment system as hotspot.
●
Activate the wireless network (WLAN) on the
device that is to be connected. If necessary,
refer to the manufacturer’s instruction manual.
●
Activate the mobile device assignment in
the infotainment system. To do this, press the
function button Use as hotspot and check the
checkbox.
●
Enter and conrm the network key displayed
on the device.
The following adjustments can also be made in
the Infotainment system as hotspot menu:
●
Network key: Network key generated auto-
matically. Press the function button to change
the network key manually. The network key
must have at least 12 characters and a maxi-
mum of 62.
●
SSID: Name of the WLAN network (maxi-
mum 32 characters).
The WLAN (wireless) connection is estab-
lished. To complete the connection, it may be
necessary to enter other data into the device.
Repeat this process to connect other devices.
There is also the option of scanning the QR
code to connect the device directly to the
infotainment system’s Wi-Fi network without
having to enter the password: select Settings >
Network > Quick connection to infotainment
system.