Cupra TERRAMAR 2024 - Anti-Puncture Kit Contents

Wheels and tyres
385
Tyre repair
1
2
WARNING
Using the puncture repair kit can be danger-
ous, particularly when lling the tyre on the
roadside. To reduce the risk of serious injury,
consider the following:
●
Stop the vehicle as soon as possible in a
safe place. Park it at a safe distance from
road traic to ll the tyres.
●
Make sure the ground is at and rm.
●
All occupants, especially children, should
stay a safe distance away from the work area.
●
Turn on the hazard lights to warn other
road users.
●
Always switch o the engine and activate
the electronic parking brake to reduce the
risk of accidental vehicle movement.
–
Vehicles with automatic transmission:
switch on the parking lock P.
●
Use the puncture repair kit only if you are
familiar with the necessary operations. Oth-
erwise, you should seek professional assis-
tance.
●
The puncture repair kit should only be
used in an emergency, to reach the nearest
garage.
●
Replace tyres repaired with the puncture
kit as soon as possible.
●
The sealant is harmful to health and must
be cleaned o immediately if it comes into
contact with the skin.
●
Always keep the puncture repair kit out of
the reach of children.
WARNING
A tyre lled with sealant does not have the
same driving properties as a conventional
tyre.
●
Never drive faster than 80km/h (50mph).
●
Avoid full throttle, braking heavily and cor-
nering at high speeds.
●
Drive for only 10 minutes at a maximum
speed of 80 km/h (50mph) and then check
the tyre.
For the sake of the environment
Dispose of used or expired tyre sealant in
accordance with the relevant legal require-
ments.
Note
You can purchase new bottles of tyre sealant
from CUPRA specialist dealers or any SEAT
network dealer.
Note
Take into account the separate instruction
manual provided by the tyre mobility system
manufacturer.
Anti-puncture kit contents
Fig.245 Standard display: contents of the
anti-puncture kit.
The anti-puncture kit is located underneath
the oor covering in the luggage compart-
ment. Includes the following components
›››Fig.245:
Valve insert remover
A sticker to be adhered to the instrument
cluster, within the driver's visual eld, to
remind that the maximum advisable speed
“max.80 km/h” or “max.50mph”