EasyManua.ls Logo

Cupra TERRAMAR 2024 - DSG Automatic Transmission

Cupra TERRAMAR 2024
430 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Driving
181
DSG automatic transmission
Or, in mHEVs, select the “Comfort” driving
prole.
2. Take your foot o the accelerator. The en-
gine will disengage and run at idle. The
vehicle runs without the engine braking ef-
fect. The engine can be switched o in ve-
hicles with a mHEV system.
Cancelling inertia mode:
1. Press the accelerator.
Alternatively, pull the automatic gear shift
paddletowards the steering wheel.
WARNING
If the inertia mode has been switched on,
take into account, when approaching an ob-
stacle, that the vehicle will not decelerate in
the usual manner: Accident risk!
When using inertia mode while travelling
down hills, the vehicle can increase speed:
Accident risk!
If other users drive your vehicle, warn them
about inertia mode.
NOTICE
The operation of the inertia mode in combi-
nation with hybrid engines (mHEV and PHEV)
can cause the combustion engine to switch
o.
NOTICE
The inertia mode will be automatically dis-
connected on gradients steeper than 15%.
Troubleshooting
The engine will not start.
The indicator lamp lights up green.
The brake is not depressed, e.g. when trying to
change the gear selector lever.
To select a gear range, press the brake pedal.
Indications on the instrument cluster display:
Clutch
Clutch overheating! Please stop!
The clutch has overheated and could be
damaged. Stop and wait for the gearbox to
cool with the engine idling and press the P
parking lock button. When the warning lamp
and the driver message turn o, go to a spe-
cialised workshop to get the fault repaired. If
they do not turn o, do not continue driving.
Seek specialist assistance.
Faults in the gearbox
Gearbox: Fault! Stop the vehicle and
place the lever in P
There is an anomaly in the gearbox. Stop
the vehicle in a safe place and do not continue
driving. Seek specialist assistance.
Gearbox: System fault! You may con-
tinue driving
Have the fault corrected by a specialised
workshop without delay.
Gearbox: System fault! You can con-
tinue driving with restrictions. Reverse gear
disabled
Take the vehicle to a specialised workshop
and have the fault repaired.
Gearbox: System fault! You can con-
tinue driving in D until switching o the en-
gine
Stop the vehicle in a safe place. Seek special-
ist assistance.
Gearbox: too hot. Adapt your driving
accordingly
Continue driving slowly. When the warning
lamp goes out, you can continue driving nor-
mally.

Table of Contents

Related product manuals