The light distribution of the headlights allows
the specic “tourist light” values to be met
without the need for stickers or changes being
made to the settings.
Note
“Tourist light” is only allowed temporarily. If
you are planning a long stay in a country that
drives on the other side, you should take the
vehicle to an Authorised Technical Service to
change the headlights.
Interior lights
Lighting of the instrument cluster,
displays and controls
The instrument and control lighting brightness
can be set in the vehicle settings menu of the
infotainment system ›››page40.
The set intensity automatically adapts to
changes in ambient brightness in the vehicle.
When the automatic dipped beam light
is turned on, a sensor automatically turns the
dipped beam light on or o, as well as the in-
strument and control lighting, depending on
the ambient brightness.
In some cases, e.g. when driving through a
tunnel without the automatic dipped beam
light function switched on, the instrument
cluster lighting may even switch o. The objec-
tive of this function is to provide the driver with
a visual indication that he or she should acti-
vate the dipped beam. If your vehicle is tted
with a digital instrument cluster, the message
Turn on the lights will be displayed on the in-
strument cluster.
Interior and reading lights
Fig.103 Detail of headliner: front interior
lighting.
Turning the interior lights on or o.
Door contact connection. The interior
lights come on automatically when you
unlock the vehicle, open a door or dis-
connect the ignition. The light goes out
a few seconds after closing all the doors,
when locking the vehicle or connecting
the ignition.
Reading light
The reading light is tactile, each lens is turned
on and o individually by pressing in the re-
spective central area. In addition, the intensity
of the light can be adjusted according to the
pressure exerted.
If you want to turn on the two lenses together
you must press the symbol
›››Fig.103.
Glove compartment and luggage compart-
ment lighting
When opening and closing the glove compart-
ment on the front passenger side and the rear
lid, the respective light will automatically switch
on and o.
Footwell lighting
The lights in the footwell area below the dash
(driver and front passenger sides) will switch on
when the doors are opened and will decrease
in brightness while driving. This brightness can
be adjusted through the infotainment system
menu using the function button > Lighting
> Settings ›››page40.
Note
The reading lights go out when the vehicle
is closed and locked or after a few minutes
of turning the ignition o. This prevents the
battery from discharging.