Cupra TERRAMAR 2024 - Stop&Go Function

206
Assistant systems
Overtaking
When the turn signal is switched on for over-
taking, the ACC reduces the distance from the
vehicle in front to help with the overtaking ma-
noeuvre. The set cruising speed will not be ex-
ceeded.
The function works at speeds over 80km/h
(50mph). It may not be available in certain
countries.
Stop&Go function
The ACC can bring the vehicle to a standstill if
the vehicle in front stops.
The ACC remains active and the message ACC
ready to start is displayed on the instrument
cluster for a few seconds. You can extend or
reactivate this warning by pressing the but-
ton or by grabbing the wheel if your vehicle is
tted with Travel Assist. During this time, the
vehicle will move o again if the vehicle in front
moves forwards.
To move o when the message ACC ready to
start is not longer displayed, once the vehicle
in front has moved o:
●
Vehicles with automatic transmission:Briey
depress the accelerator pedal.
●
OR: press the button on the multifunc-
tion steering wheel.
●
OR: grab the steering wheel again if your ve-
hicle has Travel Assist.
The ACC does not remain active in the follow-
ing cases:
●
The stopping phase lasts for several minutes.
●
When a vehicle door is opened.
●
If the ignition is switched o.
WARNING
If the message ACC ready to start is displayed
on the instrument cluster display and the
vehicle in front moves o, your vehicle will
move o automatically. In this case, any ob-
stacles in the road may not be detected. This
may cause serious accidents and injuries.
●
Always check the road before moving o,
and apply the vehicle brakes yourself if nec-
essary.
ACC system limitations
The limits of the ACC system mean that it is not
appropriate in all situations ››› in Introduc-
tion on page203.
CUPRA does not recommend using the func-
tion in the following cases ››› :
●
Heavy rain, snow or fog.
●
When going through tunnels.
●
On stretches of road with roadworks.
●
On routes with curves, e.g. on mountain
roads.
●
On o-road routes.
●
In covered car parks.
●
On roads with embedded metal objects such
as train or tram tracks.
●
On roads with loose gravel.
Pay special attention when using ACC in the
following situations:
On curves
Fig.135 Vehicle on a bend.
The ACC may not detect the vehicle in front
on a curve, or may regulate the distance from
vehicles in other lanes ›››Fig.135.