Cupra TERRAMAR 2024 - Emergency Starting Function; Driving with Electric Drive

168
Driving
The electronic immobiliser is automatically ac-
tivated when there is no longer a valid key in-
side the vehicle.
For this reason, the engine can only be star-
ted with a correctly coded Original CUPRA key.
This type of key can be purchased from a spe-
cialised CUPRA dealer or any SEAT network
dealer.
NOTICE
The correct operation of the vehicle is only
guaranteed with original CUPRA keys.
Emergency starting function
Fig.115 On the centre console: emergency
start.
If no valid key is detected inside the vehicle,
an emergency start-up will be required. The
relevant message will appear in the dash panel
display. This may happen when, for example,
the vehicle key battery is very low.
●
Immediately after pushing the start button,
place the key in the drink holder of the centre
console ›››Fig.115, as close as possible to the
Kessy logo.
●
The ignition connects and the engine starts
automatically.
Indications for the driver on the in-
strument cluster screen
Press the brake
●
This message appears on vehicles with an
automatic gearbox if the driver tries to start
the engine without having the brake pedal
pressed.
Press the brake to engage a gear
●
This indication is displayed when starting or
stopping the engine if the automatic transmis-
sion selector lever is in position D or R and the
brake pedal is not depressed. The engine can
only be started and stopped in these positions.
Engage position P; the vehicle can move;
doors can only be locked in position P.
●
For safety reasons, this driver message ap-
pears and an audible warning sounds if the
parking lock button P is not pressed after
switching o the engine. Press button P other-
wise the vehicle could move.
Ignition is switched on
●
This driver message is displayed and a buz-
zer is sounded when the driver door is opened
with the ignition switched on.
Driving with electric drive
Switching on the hybrid drive sys-
tem
✓ Valid for: hybrid vehicles
Switching on the hybrid drive activates the ve-
hicle's propulsion system. When the vehicle’s
drive system is switched on, the electric drive
is activated. The combustion engine starts au-
tomatically when the charge level of the high-
voltage battery is not suicient to run with the
electric drive, or if high drive power is required.
To access driving with the electric drive in the
infotainment system:
●
Select: > Charging > Battery Manager.