Auxiliary heating (addi-
tional heating)
Introduction
The auxiliary heater runs on fuel from the vehi-
cle's tank and can be used while you are driving
and when the vehicle is stationary.
The auxiliary heater can be controlled through
the auxiliary heating menu in the Infotainment
system, through the My CUPRA App or with the
remote control.
In winter, with the auxiliary heater switched on,
you can defog the windscreen and leave it free
of ice and snow (if it is a thin layer) before you
start driving.
If the outside temperature is very high, the ve-
hicle interior can be ventilated with the engine
o using the auxiliary heater.
The maximum operating period of the parking
ventilation is 60 min.
WARNING
The exhaust gases from auxiliary heating
contain carbon monoxide, a toxic, colourless
and odourless gas. Carbon monoxide can
cause loss of consciousness and death.
●
Never switch on the auxiliary heater or
leave it running in enclosed spaces or areas
with no ventilation.
●
Never program the auxiliary heating to
switch on and operate in an enclosed or un-
ventilated space.
WARNING
The components of the auxiliary heater are
extremely hot and could cause a re.
●
Always park your vehicle so that no part
of the exhaust system can come in contact
with easily ammable materials that might be
below the vehicle, such as dried grass.
NOTICE
Never place food, medicines or other tem-
perature-sensitive objects close to the air
vents. Food, medicines and other objects
sensitive to heat or cold may be damaged or
made unsuitable for use by the air coming
from the vents.
Switching the auxiliary heater on
and o
Connection
The independent heating can be connected in
the following ways:
●
Press the immediate on/o button in the My
CUPRA App.
●
Press the immediate on/o button in the
infotainment system’s departure menu (with
the vehicle switched o) or the on/o button
in the infotainment system’s auxiliary heating
menu (with the vehicle switched on).
●
Press button on the remote control
›››page155.
●
Automatically scheduling a departure time in
the auxiliary heater menu in the infotainment
system or in My CUPRA App ›››page156.
Disconnection
The independent heating can be switched o
in the following ways:
●
The auxiliary heating function can be turned
o immediately using the immediate on/o
button in My CUPRA App.
●
Press the immediate on/o button in the
infotainment system’s departure menu (with
the vehicle switched o) or the on/o button
in the infotainment system’s auxiliary heating
menu (with the vehicle switched on).
To Next Page
Loading...
