Synchronising a mobile with the vehicle
1. Switch the ignition on.
2. Tap the infotainment system function but-
ton .
3. Press Settings.
4. Select the option Remote Controlled
Parking with My CUPRA App.
5. Scan the QR code with the CUPRA app.
The mobile is synchronised.
6. More information is available on the CU-
PRA app.
Cancel synchronisation between the mobile
and vehicle
Remote parking is no longer possible as soon
as the synchronisation has been cancelled in
the App or in the vehicle.
mobile and app data can be deleted from the
infotainment system.
●
Tap the infotainment system function button
.
●
Delete the mobile from the Remote Con-
trolled Parking with My CUPRA App menu in
Settings.
To cancel the synchronisation completely, also
delete the vehicle from the CUPRA App.
Driving to and from a parking
space
Prerequisites
●
There is a Bluetooth® connection between
the vehicle and the mobile.
●
The vehicle key is in the driver's hands.
●
Automatic Parking System Plus: A car park
space has been found and selected in the Info-
tainment system.
●
Automatic parking system Plus with memory
and remote function: A saved parking process
(car park space) has been detected nearby the
vehicle.
●
The driver must park the vehicle at a dis-
tance of no more than 6 metres from the park-
ing space in order to park it remotely ››› .
The driver must never be in the path of the
vehicle, as this could result in damage or injury
to persons.
Driving to a car park space
If the function button appears on the screen
of the parking system, the parking process can
be carried out using the mobile.
1. To park remotely, tap the function button
in the infotainment system. The function
is activated.
2.
Exit the vehicle as soon as possible, as
the function is deactivated after a certain
amount of time has elapsed. If necessary,
take all the vehicle keys with you.
3. Check the driving route and start the park-
ing process with the CUPRA App››› .
When the car park process is complete,
a text message is displayed in the CUPRA
App.
The electronic parking brake is applied in
the vehicle and the vehicle's drive system is
deactivated.
WARNING
The parking process may be interrupted if
the driver is too far away from the vehicle,
which can lead to accidents and serious inju-
ries.
●
Remain in a safe and suitable position in
the vicinity of the vehicle.
Exiting the parking space
This function is only available for the automatic
parking system plus.
1. Open the CUPRA app.
2. Activate the vehicle's drive system with the
CUPRA App.
3. Select the desired parking mode.
4. Check the driving route and start the proc-
ess for exiting the parking space with the
CUPRA App.
5.
When the parking space exit process is
complete, take control of the vehicle to
continue driving and look at the text mes-
sages on the infotainment system ››› .
To Next Page
Loading...
