Cupra TERRAMAR 2024 - Page 396

394
Maintenance
1)
Neutral soap solution: maximum of two tablespoons in 1 l of water.
Control panels
●
Dirt: Soft brush, then a soft cloth with a neu-
tral soap solution
1)
.
Seat belts
●
Dirt: Neutral soap solution
1)
, allowed to dry
before retracting.
Fabrics, articial, Alcantara leather
●
Particles of dirt stuck to surfaces: Vacuum
cleaner.
●
Water-based dirt, e.g. coee, tea, blood etc.:
Absorbent cloth and neutral soap solution
1)
.
●
Grease-based dirt, e.g. oil, make-up, etc.:
Apply a neutral soap solution
1)
. Absorb the dis-
solved grease and paint particles dryingwith an
absorbent cloth, in case you must treat it with
water afterwards.
●
Special dirt, e.g. pens, nail polish, dispersion
paint, shoe polish, etc.: Special stain remove:
dry with an absorbent cloth, if applicable, apply
neutral soap solution afterwards
1)
.
Natural leather
●
Recent dirt: Cotton cloth with neutral soap
solution
1)
.
●
Water-based dirt, e.g. coee, tea, blood etc.:
–
Recent stains: absorbent cloth.
–
Dry stains: stain remover suitable for
leather.
●
Grease-based dirt, e.g. oil, make-up, etc.:
–
Recent stains: absorbent cloth and suitable
stain remover for leather.
–
Dry stains: grease solvent spray.
●
Special dirt, e.g. pens, nail polish, dispersion
paint, shoe cream etc.: Stain remover suitable
for leather.
●
Care: Apply preservative cream regularly to
protect from sunlight. Use a coloured preser-
vative if required.
Carbon bre parts
●
Dirt: Clean as with plastic parts.
Take special care with...
Headlights/tail lights
●
Do not clean the headlights/tail lights with a
dry cloth or sponge.
●
Do not use cleaning products that contain
alcohol. Risk of cracks!
Wheels
●
Do not use for paint wax or other abrasive
products.
●
If the protective coating on the paint of the
rim has been damaged due to stone impacts,
scratches, etc., the damage should be repaired
immediately.
Camera lenses
●
Do not use hot or warm water to remove ice
or snow from the camera lenses. Risk of crack-
ing the lens!
●
To clean the camera lens, never use abrasive
cleaning products or products with alcohol.
Risk of scratches and cracks!
Radar sensors
●
Avoid aiming the jet of pressurised water at
the radar sensors.
●
Paint the bumpers only with CUPRA ap-
proved paint.
Windows
●
Remove snow and ice from windows and ex-
terior mirrors with a plastic scraper only. To
avoid scratches, the scraper should only be
pushed in one direction and not moved to and
fro.