EasyManua.ls Logo

D-Link DWS-3160-24TC - Page 118

D-Link DWS-3160-24TC
983 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
114
Action:
Permit
------------------------------------------------------------------------------
Rule ID : 2 (auto assign) Port group: 1
Match on
Source IP : 10.0.0.1
Destination IP : 10.90.90.90
DSCP : 25
Action:
Permit
Matched Count : 0 packets
==============================================================================
DWS-3160-24PC:admin#
The following example displays an egress access profile that supports an entry mask for each rule:
DWS-3160-24PC:admin# show egress_access_profile profile_id 1
Command: show egress_access_profile profile_id 1
Egress Access Profile Table
==============================================================================
Profile ID: 1 Profile name: 1 Type: Ethernet
Mask on
Source MAC : FF-FF-FF-FF-FF-FF
Available Hardware Entries : 127
------------------------------------------------------------------------------
Rule ID : 1 Port group: -
Match on
VLAN ID : 1
Source MAC : 00-00-00-00-00-01
Action:
Permit
==============================================================================
DWS-3160-24PC:admin#
7-5 show current_config egress_access_profile
Description
This command is used to display the egress ACL part of current configuration in user level of
privilege. The overall current configuration can be displayed by “show config” command which is
accessible in administrator level of privilege.

Table of Contents

Other manuals for D-Link DWS-3160-24TC

Related product manuals