D-Link DWS-3160-24TC - Page 169

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
165
DWS-3160-24PC:admin#create captive_portal configuration 2
Command: create captive_portal configuration 2
Success.
DWS-3160-24PC:admin#
15-7 delete captive_portal configuration
Description
This command is used to delete a Captive Portal configuration.
Format
delete captive_portal configuration <int 1-10>
Parameters
<int 1-10> - Enter the Captive Portal's configuration ID used here. This value must be between 1
and 10. The default value is 1 and cannot be deleted.
Restrictions
Only Administrators can issue this command.
Example
To delete a Captive Portal configuration ID:
DWS-3160-24PC:admin#delete captive_portal configuration 2
Command: delete captive_portal configuration 2
Success.
DWS-3160-24PC:admin#
15-8 config captive_portal configuration
Description
This command is used to configure the Captive Portal’s configurations on the Switch.
NOTE: Due to the complex nature of this command, it is advised to rather use the
Web User Interface to customize the captive portal login page. For more information
about this consult the Web UI Reference Guide.
Format
config captive_portal configuration <int 1-10>[background_color [<string 32> | default] |
block [enable | disable] | clear | state [enable | disable] | foreground_color [<string 32> |
default] | group [<int 1-10> | default] | idle_timeout [<int 0-900> | default] | interface
[phy_port <portlist> | wireless_network <int 1-64>] [enable | disable] | locale <int 1-5>
[accept_msg <string 512> | accept_text {<string 512>} | account_image <string 32> |