D-Link DWS-3160-24TC - Page 180

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
176
DWS-3160-24PC:admin#show captive_portal configuration 1 status
Command: show captive_portal configuration 1 status
CP ID : 1
CP Name : Training
CP Mode : Enable
Protocol Mode : HTTPS
Verification Mode : Local
Group ID : 2
Group Name :
User Logout Mode : Enable
URL Redirect Mode : Enable
Redirect URL : http://www.company.com
Session Timeout : 1200
Idle Timeout : 0
Max Bandwidth Up (bytes/sec) : 0
Max Bandwidth Down (bytes/sec) : 102400
Max Input Octets (bytes) : 0
Max Output Octets (bytes) : 0
Max Total Octets (bytes) : 0
DWS-3160-24PC:admin#
To display the locales for the Captive Portal configuration 1:
DWS-3160-24PC:admin#show captive_portal configuration 1 locales
Command: show captive_portal configuration 1 locales
Locale Code
---------------
en
DWS-3160-24PC:admin#
To display the client’s status which authenticated to the Captive Portal configuration 1:
DWS-3160-24PC:admin#show captive_portal configuration 1 client
Command: show captive_portal configuration 1 client
CP ID : 1
CP Name : Training
No Captive Portal clients exist.
DWS-3160-24PC:admin#
In the above examples the following display parameters can be noticed:
CP ID - Displays the Captive Portal ID.
CP Name - Displays the Captive Portal name.
Operational Status - Displays whether the Captive Portal is enabled or disabled.
Disable Reason - If the Captive Portal is disabled, this field indicates the reason.
Blocked Status - Displays the blocked status, which is Blocked or Not Blocked.