D-Link DWS-3160-24TC - Page 262

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
258
Format
debug show arpunresolved_list
Parameters
None.
Restrictions
None.
Example
To debug the ARP unresolved list:
DWS-3160-24PC:admin#debug show arpunresolved_list
Command: debug show arpunresolved_list
Unresolved ARP list
IP Address last_send send_int send_cnt flag
--------------- --------- -------- -------- ----
DWS-3160-24PC:admin#
22-7 debug show error_reboot state
Description
This command is used to display ‘show error reboot’ status.
Format
debug show error_reboot state
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To display ‘show error reboot’ status: