27-2 disable erps
Description
This command is used to disable the global ERPS function on a Switch.
Format
disable erps
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable ERPS:
Command: disable erps
Success.
DWS-3160-24PC:admin#
27-3 create erps raps_vlan
Description
This command is used to create an R-APS VLAN on a Switch. Only one R-APS VLAN should be
used to transfer R-APS messages.
NOTE: The R-APS VLAN can only be created after it was created using the ‘create
vlan’ command. In other words, a normal VLAN will be assigned to represent a R-
APS VLAN.
Format
create erps raps_vlan <vlanid>
To Next Page
Loading...
