D-Link DWS-3160-24TC - Page 316

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
312
Example
To clear all FDB dynamic entries:
DWS-3160-24PC:admin# clear fdb all
Command: clear fdb all
Success.
DWS-3160-24PC:admin#
29-9 show multicast_fdb
Description
This command is used to display the multicast forwarding database of the Switch.
Format
show multicast_fdb {[vlan <vlan_name 32> | vlanid <vidlist>] | mac_address <macaddr>}
Parameters
vlan - (Optional) The name of the VLAN on which the MAC address resides.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - (Optional) Displays the entries for the VLANs indicated by VID list.
<vidlist> - Enter the VLAN ID list here.
mac_address - (Optional) Specifies a MAC address, for which FDB entries will be displayed.
<macaddr> - Enter the MAC address here.
If no parameter is specified, all multicast FDB entries will be displayed.
Restrictions
None.
Example
To display the multicast MAC address table:
DWS-3160-24PC:admin#show multicast_fdb
Command: show multicast_fdb
VLAN Name : default
MAC Address : 01-00-5E-00-00-00
Egress Ports : 1-5
Mode : Static
Total Entries: 1
DWS-3160-24PC:admin#