D-Link DWS-3160-24TC - Page 329

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
325
This name can be up to 64 characters long.
<pathname 64> - Specifies the file to copy to. The path name can be specified either as a full
path name or partial name. For partial path name, it indicates the file is in the current directory.
This name can be up to 64 characters long.
Restrictions
Only Administrators and Operators can issue this command.
Example
To copy a file:
DWS-3160-24PC:admin# copy c:/log.txt c:/log1.txt
Command: copy c:/log.txt c:/log1.txt
Success.
DWS-3160-24PC:admin#
30-12 format
Description
This command is used to format a specific drive.
Format
format <drive_id> {[fat16 | fat32]} {<label_name>}
Parameters
<drive_id> - Specifies drive to be formatted.
fat16
- Specifies a FAT16 file system
fat32 - Specifies a FAT32 file system
<label_name> - (Optional) Enter the label for the drive here. This value can be up to 8 characters
long.
Restrictions
Only Administrators and Operators can issue this command.
Example
To format a drive: