DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
338
add - Specifies to add the router ports.
delete - Specifies to delete the router ports.
<portlist> - Specifies a range of ports to be configured.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To set up port range 1-10 to forbidden router ports of default VLAN:
DWS-3160-24PC:admin#config router_ports_forbidden default add 20
Command: config router_ports_forbidden default add 20
Success.
32-6 enable igmp_snooping
Description
This command is used to enable IGMP snooping on the Switch.
Format
enable igmp_snooping
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable IGMP snooping on the Switch:
DWS-3160-24PC:admin# enable igmp_snooping
Command: enable igmp_snooping
Success.
DWS-3160-24PC:admin#
To Next Page
Loading...
