D-Link DWS-3160-24TC - Page 424

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
420
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable mac_notification function:
DWS-3160-24PC:admin# disable mac_notification
Command: disable mac_notification
Success.
DWS-3160-24PC:admin#
41-3 config mac_notification
Description
This command is used to configure the Switch’s MAC address table notification global settings.
Format
config mac_notification {interval <int 1-2147483647> | historysize <int 1-500>}
Parameters
interval - (Optional) The time in seconds between notifications.
<int 1-2147483647> - Enter the interval time here. This value must be between 1 and
2147483647 seconds.
historysize - (Optional) This is maximum number of entries listed in the history log used for
notification. Up to 500 entries can be specified.
<int 1-500> - Enter the history log size here. This value must be between 1 and 500.
Restrictions
Only Administrators and Operators can issue this command.
Example
To config the Switch’s MAC address table notification global settings:
DWS-3160-24PC:admin# config mac_notification interval 1 historysize 500
Command: config mac_notification interval 1 historysize 500
Success.
DWS-3160-24PC:admin#