D-Link DWS-3160-24TC - Page 463

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
459
Example
To delete the ports 11 and 12 from MLD snooping static member ports for group FF1E::1 on VLAN
ID 2:
DWS-3160-24PC:admin#config mld_snooping static_group vlan v2 FF1E::1 delete 11-
12
Command: config mld_snooping static_group vlan v2 FF1E::1 delete 11-12
Success.
DWS-3160-24PC:admin#
45-14 show mld_snooping static_group
Description
This command used to display the MLD snooping multicast group static members.
Format
show mld_snooping static_group {[vlan <vlan_name 32> | vlanid <vlanid_list>] <ipv6addr>}
Parameters
vlan - (Optional) Specifies the name of the VLAN on which the static group resides.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - (Optional) Specifies the ID of the VLAN on which the static group resides.
<vlanid_list> - Enter the VLAN ID list here.
<ipv6addr> - (Optional) Specifies the multicast group IPv6 address.
Restrictions
None.
Example
To display all the MLD snooping static groups:
DWS-3160-24PC:admin#show mld_snooping static_group
Command: show mld_snooping static_group
VLAN ID/Name IP Address Static Member Ports
------------------------------- ---------------------- -------------------
2 /v2 FF1E::1 11-12
2 /v2 FF1E::5
Total Entries : 2
DWS-3160-24PC:admin#