D-Link DWS-3160-24TC - Page 519

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
515
DWS-3160-24PC:admin#show ethernet_oam ports 1 statistics
Command: show ethernet_oam ports 1 statistics
Port 1
-----------------------------------------------------------
Information OAMPDU TX : 67
Information OAMPDU RX : 0
Unique Event Notification OAMPDU TX : 0
Unique Event Notification OAMPDU RX : 0
Duplicate Event Notification OAMPDU TX: 0
Duplicate Event Notification OAMPDU RX: 0
Loopback Control OAMPDU TX : 0
Loopback Control OAMPDU RX : 0
Variable Request OAMPDU TX : 0
Variable Request OAMPDU RX : 0
Variable Response OAMPDU TX : 0
Variable Response OAMPDU RX : 0
Organization Specific OAMPDUs TX : 0
Organization Specific OAMPDUs RX : 0
Unsupported OAMPDU TX : 0
Unsupported OAMPDU RX : 0
Frames Lost Due To OAM : 0
DWS-3160-24PC:admin#
51-3 clear ethernet_oam ports
Description
This command is used to clear Ethernet OAM information.
Format
clear ethernet_oam ports [<portlist> | all] [event_log | statistics]
Parameters
<portlist> - Specifies a range of Ethernet OAM ports to be cleared.
all - Specifies to clear all Ethernet OAM ports.
event_log - Specifies to clear Ethernet OAM event log information.
statistics - Specifies to clear Ethernet OAM statistics.
Restrictions
Only Administrators and Operators can issue this command.
Example
To clear port 1 OAM statistics: