D-Link DWS-3160-24TC - Page 540

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
536
DWS-3160-24PC:admin# config power_saving state enable
Command: config power_saving state enable
Success.
DWS-3160-24PC:admin#
56-2 show power_saving
Description
This command is used to display the current state of power saving.
Format
show power_saving
Parameters
None.
Restrictions
None.
Example
This example display the power saving function setting:
DWS-3160-24PC:admin#show power_saving
Command: show power_saving
Power Saving State: Enabled
Length Detection State: Disabled
DWS-3160-24PC:admin#