D-Link DWS-3160-24TC - Page 635

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
631
Format
disable sim
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To disable SIM:
DWS-3160-24PC:admin# disable sim
Command: disable sim
Success.
DWS-3160-24PC:admin#
67-3 show sim
Description
This command is used to display the current information of the specific sort of devices.
Format
show sim {[candidates {<candidate_id 1-100>} | members {<member_id 1-4>} | group
{commander_mac <macaddr>} | neighbor]}
Parameters
candidates - (Optional) Specifies the candidate devices.
<candidate_id 1-100> - Enter the candidate device ID here. This value must be between 1
and 100.
members - (Optional) Specifies the member devices.
<member_id 1-4>
- Enter the member device ID here. This value must be between 1 and 4.
group - (Optional) Specifies other group devices.
commander_mac - Specifies the commander MAC address used.
<macaddr> - Enter the commander MAC address used here.
neighbor - (Optional) Specifies other neighbor devices.
Restrictions
None.