D-Link DWS-3160-24TC - Page 644

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
640
DWS-3160-24PC:admin# config syslog source_ipif none
Command: config syslog source_ipif none
Success
DWS-3160-24PC:admin#
68-2 show syslog source_ipif
Description
This command is used to display the syslog source IP interface.
Format
show syslog source_ipif
Parameters
None.
Restrictions
None.
Example
To display the syslog source IP interface:
DWS-3160-24PC:admin#show syslog source_ipif
Command: show syslog source_ipif
Syslog Source IP Interface Configuration:
IP Interface : System
IPv4 Address : 10.90.90.90
IPv6 Address : None
DWS-3160-24PC:admin#
68-3 config trap source_ipif
Description
This command is used to configure the trap source IP interface.
Format
config trap source_ipif [<ipif_name 12> {<ipaddr> | <ipv6addr> } | none]