D-Link DWS-3160-24TC - Page 655

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
651
Parameters
host - The host index or all hosts.
<index> - (Optional) Enter the host index value here.
If no parameter is specified, all hosts will be displayed.
Restrictions
None.
Example
To display the syslog host information:
DWS-3160-24PC:admin# show syslog host
Command: show syslog host
Syslog Global State: Enabled
Host 1
IP Address : 10.90.90.1
Severity : Debug(7)
Facility : Local0
UDP Port : 514
Status : Disabled
Host 2
IP Address : 3000:501:100:ffff:101:202:303:1
Severity : Emergency
Facility : Local0
UDP port : 514
Status : Disabled
Host 3
IP Address : 10.21.13.1
Severity : All
Facility : Local0
UDP port : 514
Status : Disabled
Total Entries : 3
DWS-3160-24PC:admin#
69-11 config log_save_timing
Description
This command is used to configure the method for saving the log.
Format
config log_save_timing [time_interval <min 1-65535> | on_demand | log_trigger]