D-Link DWS-3160-24TC - Page 684

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
680
DWS-3160-24PC:admin# create trusted_host 10.48.74.121
Command: create trusted_host 10.48.74.121
Success.
DWS-3160-24PC:admin#
77-2 delete trusted_host
Description
This command is used to delete a trusted host entry from the database.
Format
delete trusted_host [ipaddr <ipaddr> | ipv6address <ipv6addr> | network
<network_address> | ipv6_prefix <ipv6networkaddr> | all]
Parameters
ipaddr
- The IP address of the trusted host.
<ipaddr> - Enter the IP address used for this configuration here.
ipv6addr - The IPv6 address of the trusted host.
<ipv6addr> - Enter the IPv6 address used for this configuration here.
network - The network address of the trusted network.
<network_address> - Enter the network address used for this configuration here.
ipv6_prefix - The IPv6 subnet prefix of the trusted network.
<ipv6networkaddr> - Enter the IPv6 subnet prefix here.
all - All trusted hosts will be deleted.
Restrictions
Only Administrators and Operators can issue this command.
Example
To delete the trusted host:
DWS-3160-24PC:admin# delete trusted_host 10.48.74.121
Command: delete trusted_host 10.48.74.121
Success.
DWS-3160-24PC:admin#
77-3 config trusted_host
Description
This command is used to configure the access interfaces for the trusted host.