D-Link DWS-3160-24TC - Page 704

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
700
81-2 disable voice_vlan
Description
The command is used to disable the voice VLAN function on a Switch. When the voice VLAN
function is disabled, the voice VLAN will become unassigned.
Format
disable voice_vlan
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the voice VLAN:
DWS-3160-24PC:admin# disable voice_vlan
Command: disable voice_vlan
Success.
DWS-3160-24PC:admin#
81-3 config voice_vlan priority
Description
This command is used to configure the voice VLAN priority value used by this Switch. The voice
VLAN priority will be the priority associated with the voice VLAN traffic to distinguish the QoS of
the voice traffic from data traffic.
Format
config voice_vlan priority <int 0-7>
Parameters
priority - The priority of the voice VLAN. The default priority is 5.
<int 0-7> - Enter the priority value here. This value must be between 0 and 7.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.