D-Link DWS-3160-24TC - Page 706

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
702
DWS-3160-24PC:admin#config voice_vlan oui add 00-0A-0B-00-00-00 FF-FF-FF-00-00-
00
Command: config voice_vlan oui add 00-0A-0B-00-00-00 FF-FF-FF-00-00-00
Success.
DWS-3160-24PC:admin#
81-5 config voice_vlan ports
Description
This command is used to enable or disable the voice VLAN function on ports.
Format
config voice_vlan ports [<portlist> | all] [state [enable | disable] | mode [auto | manual]]
Parameters
ports
- Specifies a range of port to set.
<portlist> - Enter a list of ports used for the configuration here.
all - Specifies that all the ports will be used for this configuration.
state - The voice VLAN function state on ports. The default state is disabled.
enable - Specifies that the voice VLAN function for this Switch will be enabled.
disable - Specifies that the voice VLAN function for this Switch will be disabled.
mode - The voice VLAN mode. The default mode is auto.
auto - Specifies that the voice VLAN mode will be set to auto.
manual - Specifies that the voice VLAN mode will be set to manual.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure voice VLAN ports 4-6 to enable:
DWS-3160-24PC:admin# config voice_vlan ports 4-6 state enable
Command: config voice_vlan ports 4-6 state enable
Success.
DWS-3160-24PC:admin#
To set the mode auto to voice VLAN ports 3-5:
DWS-3160-24PC:admin# config voice_vlan ports 3-5 mode auto
Command: config voice_vlan ports 3-5 mode auto
Success.
DWS-3160-24PC:admin#