D-Link DWS-3160-24TC - Page 710

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
706
DWS-3160-24PC:admin#show voice_vlan ports 1-5
Command: show voice_vlan ports 1-5
Ports Status Mode
----- --------- --------
1 Disabled Auto
2 Disabled Auto
3 Disabled Auto
4 Enabled Auto
5 Enabled Auto
DWS-3160-24PC:admin#
81-10 show voice_vlan voice device
Description
This command is used to display voice devices that are connected to the ports. The start time is
the time when the device is detected on this port and the activate time is the latest time the device
sent traffic.
Format
show voice_vlan voice_device {ports <portlist>}
Parameters
ports - (Optional) Specifies the list of ports to be configured here.
<portlist> - Enter a list of ports used to be displayed here.
Restrictions
None.
Example
To display the voice devices that are connected to the ports 1-5: