D-Link DWS-3160-24TC - Page 739

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
735
Format
delete wireless ap_failure list
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To delete all entries from the AP failure list:
DWS-3160-24PC:admin#delete wireless ap_failure list
Command: delete wireless ap_failure list
Are you sure you want to clear the entire AP failure list? (y/n) y
clear wireless ap failure list
All AP failure entries cleared.
Success.
DWS-3160-24PC:admin#
83-3 show wireless ap_failure
Description
This command is used to display a summary or detailed information for entries in the AP failure list.
Entries are added to the list when the Wireless Switch fails to validate or authenticate with an AP.
Format
show wireless ap_failure {<macaddr>}
Parameters
<macaddr> - (Optional) Enter the MAC address, of the failure AP, here.
Restrictions
None.
Example
To display summarized information of all failure APs: