D-Link DWS-3160-24TC - Page 748

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
744
client - Specifies that client stations will be displayed.
client - Specifies that client stations will be displayed.
Restrictions
None.
Example
To display associated clients on all managed SSIDs:
DWS-3160-24PC:admin#show wireless ssid client
Command: show wireless ssid client
Client
SSID MAC Address
-------------------------------- -----------------
DWS01 00-15-E9-C3-EB-77
Total Entries : 1
DWS-3160-24PC:admin#
To display associated clients on a specific SSID:
DWS-3160-24PC:admin#show wireless ssid "DWS01" client
Command: show wireless ssid "DWS01" client
Client
SSID MAC Address
-------------------------------- -----------------
DWS01 00-15-E9-C3-EB-77
Total Entries : 1
DWS-3160-24PC:admin#
84-4 show wireless switch client
Description
This command is used to display summary data for all Switches with associated clients. If the
Wireless Switch is a Cluster Controller, then this command shows all clients associated to the APs,
managed by all the peer Switches. For non-Cluster Controller Switches, only clients, managed by
the local Switches, are displayed.
Format
show wireless switch client
Parameters
None.