D-Link DWS-3160-24TC - Page 759

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
755
Format
show wireless detected_client rogue_classification <macaddr>
Parameters
rogue_classification - Specifies the WIDS rogue classification test results for a particular client
MAC address.
<macaddr> - Enter the MAC address of the specified detected client here.
Restrictions
None.
Example
To display the detected client rogue-classification:
DWS-3160-24PC:admin#show wireless detected_client rogue_classification F4-9F-
54-6B-48-50
Command: show wireless detected_client rogue_classification F4-9F-54-6B-48-50
Cond Test Test Time Since Time Since
Test ID Detect MAC Addr (radio) Config Result 1st Report Last Report
-------------- ----- -------------------- ------- ----- ----------- -----------
WIDSCLNTROGUE1 True 00-22-B0-3C-43-C0(2) Disable 0d:00:17:39 0d:00:17:10
WIDSCLNTROGUE2 False 00-22-B0-3C-43-C0(2) Enable 0d:00:37:59 0d:00:17:10
WIDSCLNTROGUE3 False 00-22-B0-3C-43-C0(2) Enable 0d:00:37:59 0d:00:17:10
WIDSCLNTROGUE4 False 00-22-B0-3C-43-C0(2) Enable 0d:00:37:59 0d:00:17:10
WIDSCLNTROGUE5 False 00-22-B0-3C-43-C0(2) Enable 0d:00:37:59 0d:00:17:10
WIDSCLNTROGUE6 False 00-22-B0-3C-43-C0(2) Disable 0d:00:37:59 0d:00:17:10
WIDSCLNTROGUE7 True 00-22-B0-3C-43-C0(2) Disable 0d:00:17:39 0d:00:17:10
WIDSCLNTROGUE1 : Known Client Database Test
WIDSCLNTROGUE2 : Client exceeds configured rate for auth msgs
WIDSCLNTROGUE3 : Client exceeds configured rate for probe msgs
WIDSCLNTROGUE4 : Client exceeds configured rate for de-auth msgs
WIDSCLNTROGUE5 : Client exceeds max failing authentications
WIDSCLNTROGUE6 : Known client authenticated with unknown AP
WIDSCLNTROGUE7 : Client OUI not in the OUI Database
DWS-3160-24PC:admin#
86-9 show wireless detected_client triangulation
Description
This command is used to display the signal triangulation status for the specified client entry.
Format
show wireless detected_client triangulation <macaddr>