D-Link DWS-3160-24TC - Page 825

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
821
Parameters
mac - Specifies to create a MAC ACL identified by its name.
<name 1-31> - Enter the new MAC ACL name used here. This parameter is a case-sensitive
alphanumeric field. This name can be up to 31 characters long.
ip
- Specifies to create an IP ACL.
standard - Specifies to create a standard IP ACL that is identified by the access list number.
<int 1-99> - Enter the standard IP ACL access list number used here. This value must be
between 1 and 99.
extended - Specifies to create an extended IP ACL that is identified by the access list
number.
<int 100-199> - Enter the extended IP ACL access list number used here. This value must
be between 100 and 199.
name - Specifies to create an IP ACL that is identified by its name.
<name 1-31> - Enter the new IP ACL name used here. This parameter is a case-sensitive
alphanumeric field. This name can be up to 31 characters long.
ipv6 - Specifies to create an IPv6 ACL that is identified by its name.
<name 1-31> - Enter the new IPv6 ACL name used here. This parameter is a case-sensitive
alphanumeric field. This name can be up to 31 characters long.
Restrictions
Only Administrators can issue this command.
Example
To create a MAC ACL:
DWS-3160-24PC:admin#create wireless access_list mac aclMac
Command: create wireless access_list mac aclMac
Success.
DWS-3160-24PC:admin#
To create a standard IP ACL:
DWS-3160-24PC:admin#create wireless access_list ip standard 5
Command: create wireless access_list ip standard 5
Success.
DWS-3160-24PC:admin#
92-2 delete wireless access_list
Description
This command is used to delete a MAC Access Control List (ACL), an IP ACL, an extended IP
ACL, or an IPv6 ACL.
Format
delete wireless access_list [mac <name 1-31> | ip [standard <int 1-99> | extended <int 100-
199> | name <name 1-31>] | ipv6 <name 1-31>]