D-Link DWS-3160-24TC - Page 919

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
915
Parameters
enable - Specifies to enable the test which marks the client as rogue if it exceeds the configured
rate for transmitting 802.11 de-authentication requests. This is the default option.
disable - Specifies to disable the test which marks the client as rogue if it exceeds the configured
rate for transmitting 802.11 de-authentication requests.
Restrictions
Only Administrators can issue this command.
Example
To enable the test which marks the client as rogue if it exceeds the configured rate for transmitting
802.11 de-authentication requests:
DWS-3160-24PC:admin#config wireless wids_security client configured_deauth_rate
enable
Command: config wireless wids_security client configured_deauth_rate enable
Success.
DWS-3160-24PC:admin#
96-7 config wireless wids_security client configured_probe_rate
Description
This command is used to enable or disable the test which marks the client as rogue if it exceeds
the configured rate for transmitting probe requests.
Format
config wireless wids_security client configured_probe_rate [enable | disable]
Parameters
enable - Specifies to enable the test which marks the client as rogue if it exceeds the configured
rate for transmitting probe requests. This is the default option.
disable - Specifies to disable the test which marks the client as rogue if it exceeds the configured
rate for transmitting probe requests.
Restrictions
Only Administrators can issue this command.
Example
To enable the test which marks the client as rogue if it exceeds the configured rate for transmitting
probe requests: