D-Link DWS-3160-24TC - Page 925

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
921
DWS-3160-24PC:admin#config wireless wids_security client
threshold_interval_auth 60
Command: config wireless wids_security client threshold_interval_auth 60
Success.
DWS-3160-24PC:admin#
96-16 config wireless wids_security client
threshold_interval_deauth
Description
This command is used to specify the threshold interval for counting the de-authentication message.
Format
config wireless wids_security client threshold_interval_deauth [<int 1-3600> | default]
Parameters
<int 1-3600> - Enter the threshold interval for counting the de-authentication message here. This
value must be between 1 and 3600. The default value is 60.
default - Specifies that the default value will be used.
Restrictions
Only Administrators can issue this command.
Example
To Specifies the threshold interval for counting the de-authentication message:
DWS-3160-24PC:admin#config wireless wids_security client
threshold_interval_deauth 600
Command: config wireless wids_security client threshold_interval_deauth 600
Success.
DWS-3160-24PC:admin#
96-17 config wireless wids_security client threshold_interval_prob
Description
This command is used to specify the threshold interval for counting the probe message.
Format
config wireless wids_security client threshold_interval_prob [<int 1-3600> | default]
Parameters
<int 1-3600> - Enter the threshold interval for counting the probe message here. This value must