D-Link DWS-3160-24TC - Page 928

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
924
Restrictions
Only Administrators can issue this command.
Example
To Specifies the maximum number of probe messages that a Switch can receive during the
threshold interval:
DWS-3160-24PC:admin#config wireless wids_security client threshold_value_prob
100
Command: config wireless wids_security client threshold_value_prob 100
Success.
DWS-3160-24PC:admin#
96-21 config wireless wids_security fakeman_ap_chan_invalid
Description
This command is used to manage when a beacon was received from a fake managed AP on an
invalid rogue channel or not.
Format
config wireless wids_security fakeman_ap_chan_invalid [enable | disable]
Parameters
enable - Specifies to manage when a beacon was received from a fake managed AP on an
invalid rogue channel. This is the default option.
disable - Specifies not to manage when a beacon was received from a fake managed AP on an
invalid rogue channel.
Restrictions
Only Administrators can issue this command.
Example
To manage when a beacon was received from a fake managed AP on an invalid rogue channel:
DWS-3160-24PC:admin#config wireless wids_security fakeman_ap_chan_invalid
enable
Command: config wireless wids_security fakeman_ap_chan_invalid enable
Success.
DWS-3160-24PC:admin#